rsw007
Pace Car
po boy racing
Posts: 131
|
Post by rsw007 on Jul 13, 2008 10:36:15 GMT -5
went to elgin last night to make some passes on jeremys"ponie1992" slicks.
the good. on motor the car ran like it does on the drag radials. on one pass it lift ed the driverside tire. not bad with 248rwhp. it went 8.20 @80mph 1.74 60ft
but on the gas i couldnt get it to leave hard best pass was 7.28@92mph but only with 1.54-158 60ft. tried 13psi and then 10psi. nitrous bottle was real low. i had 850psi on best pass but might not had enough nitrous too bet the proper amount of flow.
that track suxs anyway. i dont think my car likes slicks.
hopefully jeremy will post some videos today.
|
|
|
Post by ponie1992 on Jul 13, 2008 22:02:29 GMT -5
Working on getting the vids up now.
|
|
|
Post by ponie1992 on Jul 13, 2008 22:10:33 GMT -5
|
|
|
Post by ponie1992 on Jul 13, 2008 23:08:39 GMT -5
|
|
|
Post by Notch93 on Jul 14, 2008 9:38:09 GMT -5
Nice runs.
|
|
rsw007
Pace Car
po boy racing
Posts: 131
|
Post by rsw007 on Jul 14, 2008 16:20:13 GMT -5
the stock intake and cam are holding me back. i was hoping for a 6.99 pass but i noticed yesterday where the slicks were rubbing hard on the ground effects. i wish i had some 26" slicks to try in the 1/8th. im just not sure why my 60fts were off a whole tenth on the gas.
|
|
|
Post by waynes88gt on Jul 14, 2008 21:55:28 GMT -5
Great passes
|
|
rsw007
Pace Car
po boy racing
Posts: 131
|
Post by rsw007 on Jul 16, 2008 21:34:23 GMT -5
jeremy wheres the first nitrous pass video where i was toying with the gardrail.
|
|
|
Post by ponie1992 on Jul 16, 2008 22:09:35 GMT -5
jeremy wheres the first nitrous pass video where i was toying with the gardrail. I'll work on getting that online for ya.
|
|
|
Post by ponie1992 on Jul 17, 2008 21:21:58 GMT -5
|
|
rsw007
Pace Car
po boy racing
Posts: 131
|
Post by rsw007 on Jul 18, 2008 5:29:33 GMT -5
you are right jeremy as soon as it got off the rubber it started turning right on me.
|
|
|
Post by ponie1992 on Jul 18, 2008 6:38:49 GMT -5
Yeah, it did that twice. One time was on motor. I don't really like that track.
|
|
|
Post by crumbie on Jul 20, 2008 20:36:49 GMT -5
went to elgin last night to make some passes on jeremys"ponie1992" slicks. the good. on motor the car ran like it does on the drag radials. on one pass it lift ed the driverside tire. not bad with 248rwhp. it went 8.20 @80mph 1.74 60ft but on the gas i couldnt get it to leave hard best pass was 7.28@92mph but only with 1.54-158 60ft. tried 13psi and then 10psi. nitrous bottle was real low. i had 850psi on best pass but might not had enough nitrous too bet the proper amount of flow. that track suxs anyway. i dont think my car likes slicks. hopefully jeremy will post some videos today. 8.20s at only 80 mph is doin work! good job! stock cam and intake? what mods are done to the car?
|
|
|
Post by ponie1992 on Jul 21, 2008 6:55:10 GMT -5
went to elgin last night to make some passes on jeremys"ponie1992" slicks. the good. on motor the car ran like it does on the drag radials. on one pass it lift ed the driverside tire. not bad with 248rwhp. it went 8.20 @80mph 1.74 60ft but on the gas i couldnt get it to leave hard best pass was 7.28@92mph but only with 1.54-158 60ft. tried 13psi and then 10psi. nitrous bottle was real low. i had 850psi on best pass but might not had enough nitrous too bet the proper amount of flow. that track suxs anyway. i dont think my car likes slicks. hopefully jeremy will post some videos today. 8.20s at only 80 mph is doin work! good job! stock cam and intake? what mods are done to the car? Yeah, 8.20 on motor and on the nitrous tune! Stock cam, stock intake, GT-40 iron heads, stock bottom end, AOD, 4.10 gears, 28x9 slicks (this time, usually 275/60R15 M/T drag radials).
|
|
|
Post by crumbie on Jul 21, 2008 13:21:48 GMT -5
Yeah, 8.20 on motor and on the nitrous tune! Stock cam, stock intake, GT-40 iron heads, stock bottom end, AOD, 4.10 gears, 28x9 slicks (this time, usually 275/60R15 M/T drag radials). I need better 60 fts! My best is 8.80s at 79.6 mph (one freak 82.5 mph pass), but those are with low 2.0s or high 1.9 60 fts. stock cam, heads, intake, throttle body, mass air, etc.
|
|
rsw007
Pace Car
po boy racing
Posts: 131
|
Post by rsw007 on Jul 21, 2008 20:02:09 GMT -5
it would probably go 8.0's on a n/a tune with 26" tires.
it went 8.15@82 when it still had the stock heads. but it had 26" tires and was a super cool night 48degress. with a 1.69 60ft on motor.
|
|
|
Post by crumbie on Jul 23, 2008 18:55:33 GMT -5
it would probably go 8.0's on a n/a tune with 26" tires. it went 8.15@82 when it still had the stock heads. but it had 26" tires and was a super cool night 48degress. with a 1.69 60ft on motor. nice run! i'd love for mine to pull that et and mph one day with stock stuff.
|
|