|
Post by waynes88gt on Aug 16, 2007 21:53:11 GMT -5
Well, I need to change out my injectors as I have one or two that are leaking. I have another fuel rail with injectors, and I have the upper intake manifold gasket. I do a little work on my cars myself, but it has been awhile since I have tackled something like this. First, are there any other parts I'm going to need besides the gaskets and injectors? I know I need the tool to release the fuel rail lines, but besides that, are there any other special tools needed? Also, is there any tricks to doing this or is it pretty cut and dry? I want to get them changed this weekend and I don't want to mess anything up....Thanks in advance for any helpful tips!
|
|
xsr
Moderator
it's only a little 150hp shot!!!
Posts: 199
|
Post by xsr on Aug 16, 2007 21:55:12 GMT -5
No, you don't even have to have the fuel rail/line tool. It does make it easier, but you don't have to have it. The biggest thing, is to remove the upper, and that's the worst thing. After that, it's pretty straight forward. Just take your time putting everything back together.
|
|