|
Post by silver91hatch on Sept 26, 2007 17:16:41 GMT -5
Got a harness today out of an 88 GT and it has some issues. I have a plug some nice guy cut off. Its right below the WOT A/C relay on the right hand fender. There is a connector that goes to this small harness where it looks like an O2 sensor plugs in and there are the 4 wires that were cut. I can order a plug-tail at work and splice it I just don't know what it plugs into to order it or where it goes. Anyone help me out. There are 4 wires and the colors are green, black, grey, and tan with a red tracer. Thanks for any help.
|
|
|
Post by silverhemi on Dec 5, 2007 22:03:42 GMT -5
the only ones I can think of over there are the O2 harness, which is typically an 8 pin, and the smog solenoid wiring. By the colors I would say is the smog
|
|
|
Post by silver91hatch on Dec 5, 2007 22:50:55 GMT -5
I figured out what it was but now I can remember what it was now.
|
|
|
Post by silverhemi on Dec 6, 2007 20:41:44 GMT -5
Yeah I realized the age of the post after I sent my message, but hey, maybe it will help someone else.
|
|
|
Post by silver91hatch on Dec 7, 2007 20:48:23 GMT -5
Always good to know.
|
|