Instrument Cluster Wiring

new

« Prev
1
Next »

tripps88
Pedal Pony

Posts: 7

Instrument Cluster Wiring May 6, 2008 13:45:04 GMT -5

Quote

Post by tripps88 on May 6, 2008 13:45:04 GMT -5

Has anyone in here ever wired a Florida 5.0 gauge cluster in a 87-89 car. The instructions are fairly clear I am just unsure of what to do with the Idiot light plug. I know i am going to have to straight wire the cluster that should not be a problem. I do have a provision for a CEL in the cluster but other than turn signal indicators and high beam indicator that is it. would i have to pick up a signal from any of the pins in the idiot light plug? My gauges are as follows: Speedo, Tach, Oil Pressure, Water temp, Fuel, and Volts. Thanks for any help provided.

Tripp

88 hatch 4cyl conversion.
D&D Motorsports 342, AFR 185's, Holley Systemax Intake, Probe pistons, Erson custom grind cam, all 4340 internals, 5 lug conversion, t-56 tranny, New Edge seats, Florida 5.0 cluster w/Phantom Guages.BBK Equal Length Shorties and X-pipe, Flowmaster super 44's, 01 Bullet wheels. STEEDA upper and lowersw/HD rear sway bar. STEEDA subframe connectors with seat brace.=No $$$$

nova Foxy GT Posts: 346	Instrument Cluster Wiring May 7, 2008 8:00:14 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by nova on May 7, 2008 8:00:14 GMT -5 hey man, pm me your email. i can send you the instructions for the MC machine plate i used. it has everything you need. i did it in my car, it was a lot of work... but very worth it.
	Streetable is a Person Opinion.

Instrument Cluster Wiring

Post by tripps88 on May 6, 2008 13:45:04 GMT -5

Post by nova on May 7, 2008 8:00:14 GMT -5