|
|
Post by nova on Aug 3, 2007 20:53:12 GMT -5
didnt blow the motor... but it didnt go very well either.
start with a 125 shot. basically it will hit.. damn hard. then just fall on its face. ive talked to Trai to get some ideas about where to start diagnosing it tomorrow. but im open to any ideas?
best pass was a 15.1 on the gas...
|
|
|
|
Post by manic-mechanic on Aug 5, 2007 9:27:10 GMT -5
bottle pressure ?sure you have sipon tube in right for the way the bottle is mounted ?
|
|
|
|
Post by manic-mechanic on Aug 5, 2007 9:30:30 GMT -5
 my old truck |
|
|
|
Post by 89bluegt on Aug 5, 2007 12:39:02 GMT -5
|
|
|
|
Post by manic-mechanic on Aug 5, 2007 14:15:23 GMT -5
i cant get the other pics to show but i had a 2 stage set up on the motor ive had some dealing with the giggle gas
truck had 2 15 lbs bottles in the bed with separate fuel system for each
|
|
|
|
Post by thejock60 on Aug 6, 2007 15:03:02 GMT -5
I finally went up with my spray the car ran good with 125 shot, I put the 150 shot in and it ran good when the car was cool, but when i sprayed with the car at about 185 degree's it was surging at the top of the rpm's. so maybe any helpful advice i'd appreciate.
|
|
|
|
Post by thejock60 on Aug 8, 2007 13:36:18 GMT -5
I figured out the problem with mine, the rubber caps that go on the carb had dry rotted and was causing a vacuum leak.
|
|
|
|
Post by nova on Aug 10, 2007 14:38:49 GMT -5
philip rivers and Trai have rode in it and no luck yet. got the bottled filled again today, dont wanna spray it in 107 degree heat... stil gotta try Trais last last few things
|
|
xsr
Moderator
it's only a little 150hp shot!!!
Posts: 199
|
Post by xsr on Aug 10, 2007 15:46:36 GMT -5
If no luck, let me know. I will helpout if needed!!!
|
|
|
|
Post by nastynotchback1 on Aug 10, 2007 21:33:51 GMT -5
philip rivers and Trai have rode in it and no luck yet. got the bottled filled again today, dont wanna spray it in 107 degree heat... stil gotta try Trais last last few things the bottle was pretty much empty when i was testing it yesterday. |
|
|
|
Post by nova on Aug 16, 2007 20:41:46 GMT -5
ide like to find an evening to throw some known good parts at this thing and see if we can figure it out... cause its such a tease. it hits really hard then falls of... but when it hits... damn is it good!
|
|
xsr
Moderator
it's only a little 150hp shot!!!
Posts: 199
|
Post by xsr on Aug 16, 2007 21:53:05 GMT -5
Trai, does this bring back memory's?? Remember that job we got one day at MustangsUnlimited? Andy, set something up with Trai, and I'll try to meet to, maybe I can help. After all, ask Trai where he got his first kit from, and what he put it on. It's a funny story!!!!!!!
|
|
|
|
Post by nova on Aug 16, 2007 23:47:53 GMT -5
well hooked it up a dry kit tonight with a fuel enrichment solenoid. it did decent, much better then before, but stil not perfect. but i think the problem now is rpm related. im leaning towards a fault fuel pressure regulator.
found a 6al box... so im trying to pick that up next week so we can get on this thing!
|
|
|
|
Post by bags50lx on Aug 18, 2007 23:47:42 GMT -5
What fuel pump is on the car? And are their any safetys like fp switch. i know trai stupid questions. humor me
|
|
|
|
Post by nova on Aug 19, 2007 23:46:29 GMT -5
walbro 255, and no, theres no safety.
|
|
|
|
Post by davidr on Aug 22, 2007 9:19:49 GMT -5
Hey Andy... you move back to Clemson yet? If you need any help or a garage to work out of let me know.
|
|
|
|
Post by nova on Aug 22, 2007 13:26:36 GMT -5
yeah im back in clemson, got in friday, first day of classes was today.
|
|
|
|
Post by davidr on Aug 22, 2007 22:32:52 GMT -5
Yea we have had all the Clemson students at work buying everything not nailed down to the floors at Target!
|
|
|
|
Post by stable on Aug 23, 2007 20:59:03 GMT -5
What system are you using? More than likely the system is way to fat at 150 hp settings. All of the systems come with a jetting chart that is WAY to fat. Fat is safe, but slow. The best way to correct this is to find out the Nitrous to fuel ratio and get it in the area of 5 to 1. Give me your jet sizes and the fuel and nitrous pressure and I will give you the N/F number and a better setting on pressure to make the car happy.
Thanks
Mark
|
|
|
|
Post by nastynotchback1 on Aug 26, 2007 12:57:17 GMT -5
Trai, does this bring back memory's?? Remember that job we got one day at MustangsUnlimited? Andy, set something up with Trai, and I'll try to meet to, maybe I can help. After all, ask Trai where he got his first kit from, and what he put it on. It's a funny story!!!!!!! hey both of these stories are great |
|
